Bitumen 90/40

bitumen 90/40

Bitumen 90/40 is soft grade of oxidized bitumen with softening port 90C + 5 and penetration 40 +5 desimillimiter. Bitumen 90/40 is semi solid with some flexibility compare hard grades and mostly using in African market.

How bitumen 90/40 produce?

Bitumen is a type hydrocarbon and after destination and remove of hydrogen more carbon will remove and become harder. By injecting hot air to bitumen the oxygen of air will combine with hydrogen of bitumen and make H2O and vapour and the remain bitumen is more carbon content and called oxidized bitumen.

Packing and method of peeling

We are able to supply bitumen 90/40 in 25Kg meltable bag,50Kg meltable bag,25Kg craft bag,50Kg craft bag,25Kg carton box. In 20ft container we can supply 22.8MT bulk or pallet. In case you are looking for drum packing it is possible in 185Kg Net and 220Kg drum.

Usage and application

The asphalt 90/40 using for isolation and insulation and concrete surface coating, pipe coating, asphalt shingle, bottom sealing of carpet, paint and primer, mastic and membrane roof sheet, laminate and adhesive, roofing and flooring  and enamel.

– Foundation damp-proofing
– Built-up roofing systems.
– Roll and pour application of bitumen felts.
– Bonding of SBS modified membranes by hot-mop method.
– Sealing of laps and joints of various bituminous felts and membranes.
– Wet area waterproofing.
– Bonding of wooden boards’ insulation panels.
– Road resurfacing and repair.

How to order?

Optimum quotation is require to clear packing, quality and destination to be able to quote accordingly.We have sales agent in many many countries and if you looking for local purchase we are able to deliver DDP to the project.

Safety of usage and work

When bitumen 90/40 is in room temperature it is 100% safe and just should be in proper storage warehouse to be away from acid and fire but whenever it is on high temperature need to care about since the temperature is more than 230 centigrade.

Specification and data sheet of bitumen 90/40

BITUMEN 90/40SPECIFICATIONTEST METHOD ASTM/EN13304
SPECIFIC GRAVITY @ 25/25 CG1.04D-70
PENETRATION @ 25 C40D-5
SOFTENING POINT C90D-36
LOSS ON HEATING(WT) %0.1D-6
FLASH POINT C340D-92
SOLUBILITY IS CS2(WT) %99.5D-4
DUCTILITY @ 25 °C1.81.5 CM MIN
SATURATES (ASTM D2007)6%D2007
ASPHALTENES (IP 143)37%IP 143
RESINS28%D2007
AROMATICS30%D2007