Bitumen K160
Description of Bitumen Emulsion K1-60
Bitumen K160 is a medium viscosity emulsion produced in compliance with KS 02-769: 1990 standards. It is a cold-applied, liquid emulsion suitable for pavement construction and repair. The cationic nature of this emulsion ensures strong bonding with aggregates and existing surfaces.
Uses of Cationic Bitumen K160
Asphalt k-160 is commonly used as follows.
Tack Coat: Provides bonding between existing surfaces and overlays.
Surface Dressing: Suitable for patching, retread, and similar applications.
Table of Contents
ToggleSealing Treatments: Used in single or multiple surface treatments, sand seals, and penetration macadam.
Application Conditions for Bitumen Emulsion K1-60
Apply K1-60 at ambient temperatures between 5°C and 35°C at a spray rate of 0.25 to 0.70 liters per square meter. Ensure dry, frost-free conditions during application. Proper surface preparation, including cleaning and priming, enhances the performance of this emulsion.
Preparation and Application Guidelines
Surfaces must be dry, clean, and free from contaminants.
Use suitable equipment for application, such as spray machines conforming to BS3136 standards.
Apply evenly to avoid ponding and ensure uniform distribution.
Follow recommended application rates for optimal results.
Packing of Bitumen Emulsion K1-60
K1-60 is available in bulk as IBC Tank or Flexi Tank, as well as in reconditioned or new steel drums of 200 liters capacity. Proper handling and storage of the emulsion ensure its stability and usability.
Advantages of Bitumen Emulsion K1-60
Environmentally Friendly: Low hydrocarbon emissions during application.
Cost-Effective: Eliminates the need for additional heating or petroleum solvents.
Versatile Applications: Suitable for various construction projects, including road maintenance and repairs.
Enhanced Performance: Offers improved bonding and durability compared to traditional bitumen products.
Bitumen Emulsion K1-60 is a reliable choice for construction professionals seeking efficient, eco-friendly, and high-performance emulsions for their projects.
Specification of Bitumen K160
Specification | Test Method | Min. | Max. |
Binder Content or Bitumen Residue (%) | ASTM D6997 | 63 | – |
Storage Stability in 24-H (%) | ASTM D6930 | – | 1 |
Sieve Test (%) | ASTM D6933 | – | 0.1 |
Viscosity Saybolt Furel At 50 °C | ASTM D7496 | 20 | – |
Particle Charge (None) | ASTM D244-ASTM D7402 | Positive | |
Test On Residue From Distillation Test | |||
Penetration, At 25 °C, 100 gr on 5 sec (0.1 mm) | ASTM D5 | 50 | – |
Ductility, At 25 °C, 5 CM/Min | ASTM D113 | 40 | – |
Solubility in TCE, WT% | ASTM D2042 | 97.5 | – |
Download the MSDS of Bitumen Emulsion K1-60